Summary alarm is generated for loss of power in any of the required local oscillators
(Option 10E)
Higher frequency stability reference
+/-5 x 10 -9, -40 to +60C/day typical (fixed temerature after 24 hour on time. ( See Note 1 below)
Note: Analog reference Phase Lock: External 5 or 10 MHz at +4 +/-3 dBm. If externals reference is below +1 dBm nominal, The converter will automatically lock to the Internal reference. Reference oscillator act as an analog phase lock with a 0.1 Hz Nominal loop bandwidth. Typical loop suppression of the external reference is as follows: 28 dB at 1 Hz offset amd 100 dB at 100 Hz offset.
(Option 15)
50 ohm IF impedance
(Option 26)
Pressurization of enclosures capable of 0.5 PSI
Leak rate 3.0 standard cubic feet per hour maximum.
3/8" NPT thread with 1/4; hose barb supplied.
NOTE: Waveguride units capable of waveguide pressurization (standard)
10 cm3/min leak rate.
Please review the product PDF which contains the full and complete specifications. For conflicts between the information on this page and the product PDF, the product PDF takes precedence.
