Gain Variation vs. Temperature = 3.00 dB, pk-pk, maximum, -40?C to +60?C. (Note that the connectorized amplifiers specify a different temperature range.)
-B
DC Bias Through a Solder Pin
-C
Bias-Tee at the RF Output
-O
Power Supply, 110/220 VAC
For most models, integrated inside the LNA housing. Operating temperature range from -15?C to +60?C.
-F
Fault Alarm, Form-C Contact Closure
For most models, integrated inside the LNA housing. Operating temperature range from -15?C to +60?C.
-NEG
Negative DC Input Voltage (-24VDC)
DC Input Voltage at -24.0 VDC. Operating temperature range from -15?C to +60?C.
-P1
+15dBm output
-P2
+20dBm output
-13P
+13dBm output
-23P
+23dBm output
-TRF
Transmit Reject Filter (C-Band)
Above 5.20 GHz, Rejection of 20.0 dB, minimum.
-TRF
Transmit Reject Filter (X-Band)
Necessitates an outline change to MITEQ drawing 135805.
-TRF
Transmit Reject Filter (Ku-Band)
Above 13.5 GHz, Rejection of 20.0 dB, minimum.
-24M
2.4 mm Female Output Connector
Not available on all models. Consult factory for details
-430F
CPR430F Input Waveguide
S-Band only. MITEQ outline drawing changes to 148029.
-L
Input Limiter
Protection up to +27.0 dBm CW. May degrade Noise Temperature and Input VSWR.
-APM
Amplitude and Phase Match
Amplitude Matching (per pair) = +/-1 dB, max
Phase Matching (per pair) = ? 10?, maximum
-GW
Gain Window
-ISO
Isolator
-N
N female conn
Not available on all models. Comes standard on C-Band LNAs.
-WR28
WR28 on Output
-WP
Weatherproof Housing (KA Band)
Lowest noise temperature with this option is limited to 120K and output IP3 to 30 dB. Changes Outline to 148201-X. WP option adds additional 10K noise so it necessitates 110K as starting point for pricing.
Please review the product PDF which contains the full and complete specifications. For conflicts between the information on this page and the product PDF, the product PDF takes precedence.