Home|Contact Us|Suppliers|Employee Information

Model: AMFW-7S-07100840-50

Get a Quote
Product Category:Amplifier
Description:Amplifier - Low Noise SATCOM
Specifications at23 °C:
Frequency:7.1 to 8.4 GHz
Gain:60 dB min.
Gain Flatness:1 dB+/- max.
Noise Figure:0.691 dB max.
Noise Temperature:50 K max.
VSWR In:1.5:1 max.
VSWR Out:1.5:1 max.
P1dB Out:10 dBm min.
Voltage:15 V nom.
Current:175 mA nom.
Outline Drawing:138968-1
Operating Temp:-40 to 60 °C
Documents for

Outline Drawing:
138968 (PDF)


Available Options for AMFW-7S-07100840-50:

-TCTemperature compensationGain Variation vs. Temperature = 3.00 dB, pk-pk, maximum, -40?C to +60?C. (Note that the connectorized amplifiers specify a different temperature range.)
-BDC Bias Through a Solder Pin
-CBias-Tee at the RF Output
-OPower Supply, 110/220 VACFor most models, integrated inside the LNA housing. Operating temperature range from -15?C to +60?C.
-FFault Alarm, Form-C Contact ClosureFor most models, integrated inside the LNA housing. Operating temperature range from -15?C to +60?C.
-NEGNegative DC Input Voltage (-24VDC)DC Input Voltage at -24.0 VDC. Operating temperature range from -15?C to +60?C.
-P1+15dBm output
-P2+20dBm output
-13P+13dBm output
-23P+23dBm output
-TRFTransmit Reject Filter (C-Band)Above 5.20 GHz, Rejection of 20.0 dB, minimum.
-TRFTransmit Reject Filter (X-Band)Necessitates an outline change to MITEQ drawing 135805.
-TRFTransmit Reject Filter (Ku-Band)Above 13.5 GHz, Rejection of 20.0 dB, minimum.
-24M2.4 mm Female Output ConnectorNot available on all models. Consult factory for details
-430FCPR430F Input WaveguideS-Band only. MITEQ outline drawing changes to 148029.
-LInput LimiterProtection up to +27.0 dBm CW. May degrade Noise Temperature and Input VSWR.
-APMAmplitude and Phase MatchAmplitude Matching (per pair) = +/-1 dB, max Phase Matching (per pair) = ? 10?, maximum
-GWGain Window
-NN female connNot available on all models. Comes standard on C-Band LNAs.
-WR28WR28 on Output
-WPWeatherproof Housing (KA Band)Lowest noise temperature with this option is limited to 120K and output IP3 to 30 dB. Changes Outline to 148201-X. WP option adds additional 10K noise so it necessitates 110K as starting point for pricing.

Options may not apply to all models.

Return to: Amplifiers

Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.

FacebookLinkedInYou Tube