Sales Reps for Virginia
Delmarva Engineering
General email:

Main Office
1321 Generals Highway Suite 201 Crownsville, MD 21032
Phone: 410-990-9000
Fax: 410-923-0131

Bill Parker
Phone: 410-703-3703

Steve Neubauer
Phone: 301-807-6891

Craig Wilson
Phone: 434-249-2463

Danielle Bigot
Phone: 443-924-4809

Heather Gallagher
Office Manager


435 Moreland Rd
Hauppauge NY 11788 USA
Phone: 1-631-231-1700
Fax: 1-631-231-1711

For Component Products
Narda-MITEQ Components Sales Team

For SATCOM Products
Kazuhisa Yamashita

Get updates from Narda-MITEQ:
Mailing Address

435 Moreland Road
Hauppauge, NY 11788

PHONE: 631-231-1700
FAX: 631-231-1711

Send Special Component Product Requests, or any other questions or comments to:

Send Special SATCOM Product Requests, or any other questions or comments to:


ModulatorsA modulator commonly varies some aspect (amplitude, phase or frequency) of an RF carrier (fo, in proportion to a much lower frequency video or digital input signal (fm). In general, the input frequency components of the modulation typically extend from DC to 100 MHz, except for fast data links.

In order to preserve the information content superimposed on the RF carrier, one must insure that the output system bandwidth is adequate to pass both upper and lower sidebands (i.e. fo + fm) without distortion. In fact, system amplifier and channel distortion often will add residual AM or PM modulation to an otherwise clean transmitter.

Modulators Catalog Listing - Click here

Modulator Search
Not all fields are required.
Frequency Ranges
RF Output Min to Max
RF Carrier Min to Max
IF/Modulation Input Min to Max

Modulator Type  
Sideband Type  
Driven By  
Package Type  

Results Per Page
Modulator Search By Model
Partial Model numbers may be entered.
Results Per Page

Upconverter and modulator circuits are very similar except that in the upconverter case is usually only interested in transmitting one of the output sidebands (upper or lower) and suppressing the other. In this manner all input information at the fm port is preserved but shifted in frequency to only one RF transmitted sideband. SSB converters usually employ an input 90° hybrid to accept octave bandwidth signals in the 30 to 500 MHz range. DSB upconverting mixers often use a double-balanced mixer circuit with a high-frequency IF input that products a large separation between upper and lower output sidebands that are filtered further in the system.

A vector modulator is commonly used to vary only RF carrier phase in a linear fashion with time so that no RF amplitude variations occur. A shift in the RF carrier frequency will occur in direct proportion to the time rate of change of RF output phase. This device is sometimes known as a phase shifter or frequency offset generator (FOG). Both output sidebands can be utilized to simulate forward or reverse movement of a variable amplitude RF source (ie: Doppler generation or corrections). More recently, digital-controlled vector phase-shifting circuits are being used with linear amplitude compensation to adaptively cancel an unwanted RF echo signal. This circuit provides the unusual property of nearly linear operation at the modulation and RF input ports, although the rate of modulation is restricted.

Narda-MITEQ maintains dedicated engineering resources to modify our standard designs in support of custom-generated specifications.

Please contact Component Sales with any special requirements you may have:
Tel: 631-231-1700
Fax: 631-231-1711

All Modulators are backed by Narda-MITEQ's 3-Year Warranty and most are available as RoHS Compliant components.



Parent Categories:
Active Components | Components | Passive Components | Spaceborne Products
Related Products
Converter Modules | Frequency Multipliers | Mixers | Multipliers | Product Highlight: Mixers In Stock | RF/Microwave Components

Please Contact Narda-MITEQ for more information:

Phone: +1 (631) 439-9220
Phone: +1 (631) 439-9220

Click Here For More Contact Options...