Translate:

Model: IRM0118HC1Q


Product Category:	Mixer
Description	Mixer

Inputs
RF Frequency Min.	1000 MHz
RF Frequency Max	18000 MHz
RF VSWR Typ.	3 Ratio RF = -10 dBm, LO = +18 dBm
LO Frequency Min.	1000 MHz
LO Frequency Max.	18000 MHz
LO Power Min.	17 dBm
LO Power Max.	20 dBm
LO Power Typ.	18 dBm
LO VSWR Typ.	2.5 Ratio LO = +18 dBm

Outputs
IF Frequency Minimum	0 MHz 3 dB Bandwidth
IF Frequency Maximum	500 MHz 3 dB Bandwidth
IF VSWR Typ.	1.5 Ratio IF = -10 dBm, LO = +18 dBm

Transfer Characteristics
Conversion Loss Maximum	15 dB IF=100 MHz, LO = +18 dBm
Conversion Loss Typical	14 dB IF=100 MHz, LO = +18 dBm
LO to RF Isolation Min.	18 dB
LO to RF Isolation Typ.	20 dB
LO to IF Isolation Typ.	20 dB
Input P1dB Typical	15 dBm
Input IP3 Typical	25 dBm
Single Sideband Noise Figure Typ.	15.5 dB
IQ Amplitude Balance (+/-)	1.5 dB
IQ Phase Balance (+/-)	15 Deg

Mechanical
Outline Drawing	126060

Environmental
Operating Temperature Min.	-54 °C
Operating Temperature Max.	85 °C
Storage Temperature Minimum	-65 °C
Storage Temperature Maximum	125 °C

Quality Assurance
Test Data Supplied At 25 Deg. C
Conversion Loss
LO to RF Isolation
Phase and Amplitude Balance

Documents for
IRM0118HC1Q
Datasheet:
MITEQ-IRM0118 (PDF)
Outline Drawing:
126060 (PDF)

ECCN: EAR

Return to: Mixers

Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.

Narda-MITEQ uses this website as a channel of distribution of material company information.
Catalog specifications subject to change without notice.
This web site consists of Narda-MITEQ general capabilities information that does not contain controlled technical data as defined within the
International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.