Home|Contact Us|Suppliers|Employee Information|Login|Register
Narda-MITEQ
Translate:

Model: DN2-9805-1K

Product Category: Converter

Get a Quote

Description
SYNTHESIZED MULTI-CHANNEL DOWNCONVERTERS

Features
Internal LOcheck 
Internal Referencecheck 
DownConvertercheck 

Frequency Ranges
 

Electrical Specifications
Number of Channels2 
Conversion Gain Min.43dB
ConversionGaindBMax50 
Noise Figure12dB
Output Power Min.20dBm

Temperature Ranges
 

Humidity
Humidity95%
Humidity Degrees30?C
NonCondensing0 

Physical
Length22Inches
Width19Inches
Height3.5Inches
Weight11818grams

Package Types
PackageRack Mount 
 
Documents for
DN2-9805-1K

Datasheet:
D-353 (PDF)

Manual:
9800SERIES-MULTICHANNEL-D (PDF)


ECCN: EAR
 
 
 

Similar Models
DN2-9800-3-1K
DN2-9800-6-1K
DN2-9801-1-1K
DN2-9802-2-1K
DN2-9808-6-1K
DN2-9813-4-1K

Available Options for DN2-9805-1K:

OptionDescriptionDetails
(Option 1A)DN2 models - 45 dB level control
(Option 10C)Higher frequency stability reference
(Option 15)50 ohm IF impedance
(Option 10D)Tracking Reference ?2 X 10-8, 0 to 50?C 1 X 10-9/day typical (fixed temperature after 24 Hour)
(Option 10G)Tracking Reference High Stability ?5 X 10-9, 0 to 50?C 1 X 10-9/day typical (fixed temperature after 24 Hour) This option replaces Option 10E
(Option 10H)Tracking Reference High stability ?2 X 10-9, 0 to 50?C 1 X 10-9/day typical (fixed temperature after 24 Hour) This option replaces Option 10F
(Option 16C)DN2 models - Higher gain
(Option 17C)RS232 remote interface
(Option TNCIF)DN2 models - Type TNC female IF connector and IF monitor
(Option NRF)DN2 models -Type N RF Connector RF connector (Note: Monitor remains SMA female). RF return loss: 18 dB, 9-15 GHz, not available above 15 GHz.
(Option TNCRF)DN2 models -Type TNC female RF connector (Note: Monitor remains SMA female) RF return loss: 18 dB, 9-15 GHz, not available above 15 GHz.
(Option 18-4a)DN2 models - Multiple IF output module (downconverter only: not campatible with NSUN, or Option 14) -4 Four IF ouputs each channel
(Option 18-4b)DN3 models - Multiple IF output module (downconverters only: not compatible with NSUN, or Option 14) -8 Eight IF outputs each channel Output 1 dB comprssion point: +10 dB

Options may not apply to all models.


Return to: Converters

Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.

FacebookLinkedInYou Tube