| Option | Description | Details |
|---|
| (Option 1) | Level Control Option 45dB | |
| (Option 4) | 140 MHz IF Frequency | |
| (Option 5) | Group Delay Equalization | 1 ns p-p maximum/70 +/-18MHz IF
2 ns p-p maximum/140 +/-36MHz IF
With option 20, price is $5000 |
| (Option 8) | LO Level Detect | |
| (Option 10C) | Higher Frequency Stability | |
| (Option 10E) | Analog reference Phase Lock | |
| (Option 10G) | Tracking Reference High Stability | +/-5 X 10-9, 0 to 50C
1 X 10-9/day typical (fixed temperature after 24 Hour)
This option replaces Option 10E |
| (Option 10H) | Tracking Reference High stability | +/-2 X 10-9, 0 to 50C
1 X 10-9/day typical (fixed temperature after 24 Hour)
This option replaces Option 10F |
| (Option 15) | 50 Ohm IF Impedance | |
| (Option 16C) | 55 dB Nominal RF/IF Gain | |
| (Option 19A) | 500 MHz to 3000 MHz RF-Band fiber optic interface (not compatible with NSU). INCLUDES ORM-103000-1. | Upconverter output transmitter
Fiber: 9/125 (single mode fiber),
Wavelength: 1540-1560 nm,
Optical power in fiber: 4 mS typical,
Connector: FC/APC |
| (Option 17C) | RS232 Remote Interface | |
| (Oprion 19B) | 500 MHz to 3000 MHz RF-Band fiber optic interface (not compatible with NSU). INCLUDES ORT-103000-1. | Downconverter input receiver.
Fiber: 9/125 single mode fiber,
Wavelength: 1300-1560 nm nominal,
Connector: FC/APC |
| (Option 20) | Selectable IF Frequencies | L, S, C and Ku Option |
| (Option 18-4) | Four IF Outputs | |
| (Option 18-8) | Eight IF Outputs | |
| (Option 31A) | Ultra low phase noise (see data sheet for Phase Noise specifications chart). | Option 10E (analog reference phase lock) supplied as standard and internal reference U-link provided (an external 10 MHz reference may be applied). Higher frequency stability available for details. See options 10 and 10F. |
| (Option 31D) | 10 MHz external reference only @ +4 +/-3 dBm. | For ultra low phase noise reference (no reference suppression or direct reference multiplication inside 100 kHz. See data sheet for required phase noise |
| (Option 31C) | 5 MHz external reference only @ +4 +/-3 dBm. | For ultra low phase noise reference (no reference suppression) or Direct reference multiplication inside 10 kHz. See data sheet for required phase noise. |
| (Option 31B) | Ultra low phase noise (see data sheet for Phase Noise specifications chart) Includes Option 10F | Option 10F (analog reference phase lock) supplied as standard and internal reference U=link porvided (and external 10 MHz reference may be applied. |
| (Option NRF) | Type N RF Connector RF connector (Note: Monitor remains SMA female). RF return loss:
18 dB, 9-15 GHz, not available above 15 GHz. | |
| (Option 33) | 9600/9700 SERIES phase noise suppression | BFS FUND SYNTH |
| (Option TNCIF) | Type TNC female IF connector and IF monitor | |
| (Option TNCRF) | Type TNC female RF connector (Note: Monitor remains SMA female). RF return loss:
18 dB, 9-15 GHz, not available above 15 GHz. | |
| | |
| SLD EXT | Slide extension 6" | Slide extension 6" |
Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.
